Press "Enter" to skip to content

Bed Level Tool

Uses the bed limits and the adjusters position to create a suggestion how to adjust the bed. Each adjustment point/screw will give

  • Clockwise/counterClockwise turn of the adjuster
  • Amount of turn described as hours:minutes where 1:20 means ” 1 turn = 1 hour and 1/3 turn = 20 minutes
  • The lower left corner is fixed. All other adjusters are compared to this “fixed” adjuster.
  • The meassured value from the z-probe is shown.

After each bed-level-procedure the adjuster is calculated and the extruder is moved to the “Safe-Home” position and the adjustmen ovf the adjusters can be done.

Repeat until all adjusters are within wanted differance. ( within 10 minutes turn is a good startingpoint)